Sub-Zero appliances repair Beverly Hills


Leak and Chilly Refrigerator Problems


 Sub-Zero Refrigerator Repair in Beverly Hills, CA

Sub-Zero produces some of the highest quality refrigerators on the market but even its products are not immune to the dangers of a bit of damage. Whether it is caused by regular use, an electrical surge, or improper handling, appliances have problems. You can sort through these problems with the help of ACME Sub-Zero appliances repair Beverly Hills and a bit of handiwork on your part.


 Chilling Problems

If you find that your Sub-Zero refrigerator is producing a lot of excess frost or is building up ice when it really should not be then something is wrong. Before you do anything else fiddle with the cooling dial to see if that will help. If you have adjusted the temperature of your refrigerator and it is still acting oddly then it could be a technical problem. Check your door. It is not uncommon for the gaskets on refrigerator doors to break. Every time you open and close your refrigerator door you are putting strain on the gasket and eventually one may just blow out.
There are a number of ways to identify this as a problem. One method is to slip a strip of paper into your refrigerator door and to try to pull it out. If a gentle tug is all that it takes then your refrigerator door is not sealing properly. Another way is to put a bright flashlight into your refrigerator aimed at the refrigerator door. Turn out the lights to your kitchen and, turn on the flashlight, and close the refrigerator door. A broken door will allow for light to shine through.

The same space that is allowing the light to shine out of the door is letting cold air escape too. You might be thinking that a leak would cause your refrigerator to warm up rather than to cool down. The way that refrigerators and freezers work, the warmer that a refrigerator is, the colder the output it will circulate in order to keep things at an appropriate temperature. If it is heating more rapidly than it should be, then your refrigerator will overcompensate and chill your foods. Freezers do the exact same thing. Your solution to this problem is to order a new gasket and replace the current one or to have ACME Sub-Zero refrigerator repair Beverly Hills do it for you if you do not want to take apart your refrigerator door.


 Leaky Refrigerators

If you have puddle problems outside of your refrigerator it can be coming from three different sources. First check your freezer to see if it is leaking water. If water is not spilling out of your freezer then check to see if there is ice pooling in your freezer and dripping into your refrigerator. If it is not that then that means it is the ice maker which is leaking.
If your freezer is leaking then there is not a lot that you can do on your own. It is a technical issue that you will should consult ACME Sub-Zero refrigerator repair Beverly Hills about to get fixed and working again.
Should the problem be that your refrigerator has a drip then that is being caused by a clog in your freezer’s defroster. You can fix this can turning off your refrigerator, opening the back panel, and cleaning out the defroster. The most common culprit is food or packaging becoming trapped inside of your freezer’s defroster. You can clean those out with a little bit of suction and a lot of patience. Sometimes there will just be ice buildup within the defroster. Break through that and that should fix the problem.
Sometimes the issue will be in the ice maker though and this is a bit problem troublesome than the other problems. You can take care of the ice maker yourself but it is a bit of a headache. First disable the ice maker by turning off the shutoff valve usually located underneath your sink. After it has been shutoff proceed to check if it is actually plugged in. If the plug is out then just slip it back on, reverse the shutoff valve, and you should be back in business. If that is not the problem then you will need to flush the drain.
Chances are that your drain has clogged and if you do not unclog it you will never be free of your flooding problems. Run diluted bleach into the drain a few times and then try turning your ice maker back on. If this did not help, you can try again or call ACME Sub-Zero refrigerator repair Beverly Hills to take a look at the issue.

SERVICE: 800-440-8583, Local: 310-751-0414

Or contact us by mail:

[contact-form-7 id=”4293″ title=”Contact form 1″]

Sub Zero refrigerator error code 50 sub-zero refrigerator service

Sub Zero refrigerator error code 50 (sub-zero refrigerator service)

2 Some Sub Zero refrigerators have electronic control boards, actually most modern Sub Zero refrigerators do. The control board on the refrigerator does a lot. The control board tells the compressor when to come on, sends voltage to the lights fans, so on and so forth. If the refrigerator has an internal problem, Sub Zero has the logic in the board programed to display an error code in the digital read out. One of the more common Sub Zero refrigerator code is error code 50. The code 50 means excessive compressor run time, more often than not resulting from a leaking evaporator. Unlike most residential refrigerators, Sub Zero uses two compressor and two evaporators. This means that if one side stops cooling it wont affect the other side (refrigerator side and freezer side).

The first thing that needs to be done is to examine the evaporator itself. The back panel needs to be removed to have a look at the coils. The coils should have 1/16 frost from top to bottom. In most cases with this error code, the evaporator will only have frost in the upper left corner, this means you have a freon leak. If you are unable to remove the back panel and would like to speak with a technician, you can call us: 800-440-8583 and speak with one of our technician

– See more for Sub-Zero error codes here:

Sub Zero 700TR Refrigerator Price and Review

The Sub Zero 700TR is a-27 inch thickness integrated Refrigerator and Freezer using a retail price of $6,890.00.
Sub Zero 700TR Refrigerator
It has an 80 inch peak having a total depth of 24 inch. 700TR has 1/2 region allocation. 19 an entrance allocation of 25 1/2 inch and It’s a refrigerator ability of 15.5 cu ft. Finished Opening: 27″ W x 80″ H x 25″ D (Depth is 24″ from the front of the apparatus to its back).

Design might merit transferring the unit back, or cupboards ahead to attain a match that is flush. This will definitely need a minimal opening depth of 25″.

Features of Sub Zero 700TR:
Custom panels allow for endless design options.
Point-of- use refrigeration that can be placed any place in your home.
Microprocessor keeps precise control, within 1 deg of set temperature in each one of two temperature areas.
Simple- illuminated touch control panel, entry.
Bright inside lighting in cupboard.
Flexible spill- proof glass shelves, door ledges and dairy area.
Flexible deli drawer with shelf for storage of things that are smaller.
Removable sharper cover on storage drawer that is top.
Upper storage drawer is deep enough for beverages that are bottled to stand upright.
Door alarm comes with an audible beep if door is left open.
90 doorstop included in hinge.
Accessories of Sub Zero 700TR:

Metal front panels with tubular or expert handles 80″ or 84″ finished elevation.
Stainless professional and steel tubular handles.
Dual setup packages drawer or tall version, with line for setup.
Sharper shelf and drawer construction.
Dozen egg box.
Interior Features of Sub Zero 700TR:

Double Refrigeration
2 Heat Zones
Adjustable Glass Shelves
1 Stationary Ledge
Removable Cover
2 Removable Drawer Dividers
Flexible Deli Drawer
3 Adjustable Door Shelves
Adjustable Compartment
Egg Container
An fridge cupboard with two fridge drawers below. A compact 27″ wide, the Subzero 700TR All-Refrigerator gives you large-capability refrigeration — more than 15 15 cubic feet in all. That is excellent appliance for customers who’ve a classy and sophisticated decor in their own kitchen.

Same day service for Sub Zero 700TR Refrigerator is available in Los Angeles: (800) 440-8583